The 4X4 Store
604 Bridge Street
Clarkston, WA 99403
ph: (509)758-14X4 (1494)
fax: (509)758-14X4 (1494)
Dennis
We have much more inventory not listed on this website. Call 509-758-1494 for availability.
Plate style
Only $34.99
Warn Industries
Only $79.99
Only $79.99 for Warn
We are offering a heavy duty 3/4" Mega Shackle with a lifetime guarentee.
Only $49.99 pair
Add your winch to any 2" receiver. Just mount the winch to the cradle, add some wiring and you have a winch on any vehicle.
Only $149.99 each.
2 Gauge wire Only $2.49 a foot
Copper Lug Only $1.49 each
Quick Disconnects Only $46.99 pair
Unviersal 12,500lbs winch fairlead $74.99
Universal 9,000lbs winch fairlead $59.99
Hawse Fairlead
Polished aluminum hawse fairlead. Designed for use with synthetic winch rope. Mounting holes are 10" on center for standard 3/8" bolts, compatible with most 5,000-9,500lb winches. Ultra smooth guide surface (rounded on both sides) to prevent damage to rope.
Only $39.99
Hawse Fairlead Isolator
These Daystar winch isolators help stop your winch hook from rattling in your fairlead, while giving you a practical place to secure your winch hook. Installation is as easy as 1, 2, 3--simply disconnect your winch hook, run your cable through the isolator, reinstall your hook,
and you're done! Once installed, the Daystar winch isolators will not interfere with winching operations.
Only$36.99
If you lost your place to mount a license plate when you mounted a winch, this is the solution.
Only $33.99 each
Flip up Mount for Hawse fairlead Only 27.99 each
We stock a replacement cable for your 8,000lb-12,000lb winch.
Import wire rope, 95' of 3/8" cable only $69.99 roll
We always like to stock Hi Lift jacks. They are a required tool for any off road enthusias
t.
48" Steel $74.99
60" Cast $89.99
Can't get any better than that.
We also have Isolators
Only $9.99 each
Weld on Hi Lift mount
Only $29.99
Clamp on HiLift mounts
TM700 1"-2" Tube Clamp only $69.99
TM750 2"-3" Tube Clamp only $79.99 pictured
Hi Lift mounts
LR200 LocRac includes lock $34.99
4X400 4XRac dual mount $39.99
Hi Lift Base ORB Only $44.99
Designed to fit into standard 2" hitch receivers. Makes a great anchor point for winch or strap recoveries. Made from 8620 forged tool steel. Working load limit 4 3/4" tons. Includes 3/4" D-ring and receiver mount. Zinc plated finish. Includes 5/8" hitch pin.
Only $39.99 each
We stock a variety of Shackles for recovery.
3/4" Shackle, black or galvenised Only $12.99 each
1" Shackle Only $19.99 each
Designed for winch capacities to M12000 with 7/16"(11mm) wire rope.
Kit includes:
- Heavy-duty snatch block. 24,000 lbs/10886 kgs maximum capacity
- Tree trunk protector 4" x 8' (10cm x 2.4m) Rated to 30,000 lbs breaking strength
- 10' of 5/16" (3m of 8mm) grade 70 choker chain with hooks
- 3/4" (20mm) Clevis/D-shackle
- Standard recovery strap, 3" x 30' (8cm x 9m) Rated to 21,600 lbs/9797 kgs.
- Camouflage Cordura nylon soft case
- WARN gloves
Only $329.99
Designed for winch capacities to 9.5ti with 5/16" (11mm) wire rope.
Kit includes:
- 4" x 8' (10cm x 2.4m) tree trunk protector rated to 30,000lbs breaking strength.
- 2 Clevis/D-shackles 3/4" (20mm) pin diameter.
- 19,000lbls/8618kgs capacity snatch block with grease port.
- 3" x 30' (8cm x 9m) standard recovery strap rated to 21,600lbs/9797kgs.
- Camo Cordura nylon soft case.
- WARN gloves.
Only $99.99
Fits all Warn winches but the 8274.
Only $159.99 kit
The new WARN remote controls incorporate an improved ergonomic design and intuitive features that help operators better navigate through
winching operations. WARN remotes have been designed with an intuitive rocker switch with an elevated dimple on power-out, a recessed dimple on power-in, and a high-impact polymer grip that allows operators to pay more attention to the winching situation and less on the remote itself. By using the sense of feel rather than sight, operators can confirm the winch line's direction without relying on visual cues on the remote's handle. Increased control surface area on the remote allows for easy use, even while wearing gloves.
Remote without Integrated Flashlight (for use with all WARN vehicle winches except 9.5ti, 9.5si, and 16.5ti)
Only $79.99.
Fits a wide selection of winches 8,000lbs and 9,000lbs.
Only $109.99
Available for the XD9000i winch, the WARN hard winch covers are made from Armor Guard high impact co-laminate. They fit over a roller
fairlead and provide maximum protection for your winch from weather and debris. Modern styling and an aerodynamic design.
For XD9000i winch with a roller fairlead.
Only $64.99
5742 M8000 Fairlead 99.99
38307 8274 complete decal set 29.99
22680 Electrical connector 46.99
34035 Winch Cover 64.99
16296 Socket for remote 39.99
28461 Solenoid cover 48.99
7582 8274 winch cap end 9.99
14867 Winch plug extension $49.99
We offer a huge selection of additional
off-road products which are usually available in
1 day.
Copyright 2017 The 4X4 Store. All rights reserved. (509) 758-14X4 (1494)
The 4X4 Store
604 Bridge Street
Clarkston, WA 99403
ph: (509)758-14X4 (1494)
fax: (509)758-14X4 (1494)
Dennis